Skip to content

G.SKILL · DDR5 · 32 GB

G.SKILL Trident Z5 Royal Series (Intel XMP 3.0) DDR5 RAM 32GB (2x16GB) 6400MT/s CL30

(2x16GB) · 6400 MT/s · CL30 · 9.38 ns · Intel XMP

Performance
95
Perf / price
30
Capacity value
36
Amazon
$1000
$1000
Available Updated 3 days, 11 hours ago
Performance95.3
Performance / price30.5
Capacity value36.0
$1000 on Amazon RAM table Compare this RAM

Build with this RAM kitSelect a CPU and motherboard first so the Builder can verify the memory type. Start with a compatible CPU

Written analysis

G.SKILL Trident Z5 Royal Series (Intel XMP 3.0) DDR5 RAM 32GB (2x16GB) 6400MT/s CL30 at a glance

The G.SKILL Trident Z5 Royal Series (Intel XMP 3.0) DDR5 RAM 32GB (2x16GB) 6400MT/s CL30 from G.SKILL is listed as part number F5-6400J3039G16GX2-TR5S and is a 32 GB DDR5 kit in a (2x16GB) layout on a DIMM form factor. It is non-ECC consumer memory, aimed at desktops, gaming, and general use.

Best fit: Performance-focused desktop builds that can run the listed data rate and timings through a supported memory profile.

Performance

This kit runs at 6400 MT/s with primary timings of 30-39-39-102 and a calculated first-word latency of 9.38 ns. Its calculated performance score is 95.3, placing it in the top tier of the catalog . Actual operation at the advertised settings depends on CPU memory-controller, motherboard, and profile support.

Cost-effectiveness

From a cost-efficiency view this kit is expensive per gigabyte at $31.2/GB. Combined capacity value is 36.0. That is a relatively weak return in this category. High-speed kits often sell at a premium; buyers chasing peak latency may still accept the price.

Memory data

Full specifications

Kit composition, capacity, operating speed, timings, voltage, compatibility details, and pricing in one technical sheet.

General

Manufacturer
G.SKILL
RAM
G.SKILL Trident Z5 Royal Series (Intel XMP 3.0) DDR5 RAM 32GB (2x16GB) 6400MT/s CL30
Part number
F5-6400J3039G16GX2-TR5S
Launch price
Amazon price
$1000
Availability
In stock
Price updated
3 days, 11 hours ago

Kit

Capacity / type
32 GB / DDR5
Kit / form factor
(2x16GB) / DIMM
Modules
2 × 16 GB
ECC
No
RGB
No
Memory profile
Intel XMP

Speed & timings

Data rate
6400 MT/s
CAS latency
CL30
First-word latency
9.38 ns
Primary timings
30-39-39-102
Voltage
1.40 V

Value

Amazon price
$1000
Price / GB
$31.25
Performance / price
30.5
Capacity value
36.0

Additional information

Also listed as
32GB (2x16GB) 6400MT/s
Color
Silver

Amazon

Price history

Nearby performance

Similar RAM kits

DDR5 kits close to G.SKILL Trident Z5 Royal Series (Intel XMP 3.0) DDR5 RAM 32GB (2x16GB) 6400MT/s CL30 on calculated performance. Open the RAM table to sort, filter, and compare side by side.

Compare these in the RAM table

Discussion

Comments on G.SKILL Trident Z5 Royal Series (Intel XMP 3.0) DDR5 RAM 32GB (2x16GB) 6400MT/s CL30

No comments yet.

Vendor copy

Amazon listing details

Marketplace feature text kept for reference. Structured specs above are the source for scores and tables.

G.SKILL Trident Z5 Royal Series DDR5 U-DIMM Memory Kit, Model: F5-6400J3039G16GX2-TR5S

32GB total capacity kit containing 2x16GB modules, rated for up to DDR5-6400 CL30-39-39-102 at 1.40V

Non-ECC, DDR5 U-DIMM, 288-pin, for Desktop PC & Gaming

Includes JEDEC default profile, and Intel XMP 3.0 memory overclock profile

Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.

For Intel Z890, Intel Z790, Intel Z690, Intel B860, Intel B760 platforms. Refer to G.SKILL memory QVL or RAM Configurator tool on the G.SKILL website for more details on validated motherboard and hardware.

Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components.

Memory kits will boot at JEDEC default SPD speed at default BIOS settings with compatible hardware.

For memory kits with XMP and/or EXPO overclock profile, enable XMP/EXPO/DOCP/A-XMP profile in BIOS to reach up to the rated potential XMP or EXPO overclock speed of the memory kit, subject to the use of compatible hardware. Enabling XMP or EXPO is an act of overclocking and requires BIOS setting adjustments.

Reaching the rated XMP or EXPO overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.