Skip to content

Lian Li · Mid-Tower · Tempered glass

Lian Li Lancool 216

Mini-ITX, Micro-ATX, Standard-ATX, E-ATX · Black · USB-C

Quality
91
Quality / price
80
Max GPU
392 mm
Amazon
$103
Lian Li Lancool 216
View Lian Li Lancool 216 Gallery in high resolution
$103
Available on Amazon Updated Aug 30, 2026 Prime FBA
Overall quality91.0
Quality / price79.5
Cooling support18
$103 on Amazon Case table Compare this case

Check this case with a complete fit chainSelect a CPU and motherboard first; the Builder will then verify board size and GPU clearance. Start the compatibility check

Written analysis

Lian Li Lancool 216 at a glance

The Lian Li Lancool 216 is a Mid-Tower chassis with a tempered glass side panel profile. Supported boards: Mini-ITX, Micro-ATX, Standard-ATX, E-ATX. Primary materials are listed as steel, plastic, and tempered glass.

Overall quality is 91.0, summing compatibility, cooling, storage, build quality, and connectivity. Max GPU length is 392 mm. Max CPU cooler height is 180 mm. Largest radiator support is listed at 360 mm.

Best fit: High-end long-GPU builds that need support for at least one 360 mm radiator; verify the listed radiator positions before planning a multi-radiator loop.

Cooling and front I/O

Front ports: 1 x Power Button 1 x Reset Button 2 x USB 3.0 1 x USB Type C 1 x Audio. USB-C is present on the front I/O. Dust filters: Yes.

Current value

At $103, quality / price is 79.5. Compare nearby cases of the same form factor below; clearance and panel type can outweigh a small quality gap.

Chassis data

Full specifications

Construction, clearances, cooling, storage, front I/O, and quality metrics in one technical sheet.

General

Manufacturer
Lian Li
Case
Lian Li Lancool 216
Form factor
Mid-Tower
Side panel
Tempered glass
Launch price
—
Amazon price
$103
Amazon availability
Available
Price updated
Aug 30, 2026

Construction

Material
steel, plastic, and tempered glass
Color
Black
Side panel detail
tempered glass
Dimensions
(D) 480.9mm x (W) 235mm x (H) 491.7mm
Weight
—
PSU shroud
Yes
RGB lighting
No

Quality & value

Overall quality
91.0
Compatibility
20
Cooling support
18
Storage score
20
Build quality
18
Connectivity
15
Quality / price
79.5

Compatibility / clearances

Motherboard sizes
Mini-ITX, Micro-ATX, Standard-ATX, E-ATX
Max GPU length
392 mm
Max cooler height
180 mm
Max PSU length
220 mm
PSU form factor
ATX, SFX
PSU included
No

Cooling

Max radiator
360 mm
Fan support
Top: 3 x 120mm / 2 x 140mm PSU Cover: 2 x 120mm / 2 x 140mm (Air Cooling mode) Front: 3 x 120mm / 2 x 140mm / 2 x 160mm Rear: 1 x 120mm / 1 x 140mm (Not compatible with UNI FAN SL-INF 140) PCIe Fan Bracket: 1 x 120mm
Radiator support
Front: 360 / 280 / 240mm Top: 360 / 280 / 240mm Bottom: 240mm
Pre-installed fans
Not specified
Dust filters
Yes

Storage & I/O

Drive bays
Drive Cage：2 x 2.5” SSD + 2 x 3.5” HDD PSU Cover：2 x 2.5” SSD Behind MB tray: 2 x 2.5” SSD
Expansion slots
7
Front ports
1 x Power Button 1 x Reset Button 2 x USB 3.0 1 x USB Type C 1 x Audio
USB-C
Listed

Additional information

Also listed as
Lancool 216

Amazon

Price history

Nearby quality

Similar cases

Cases close to Lian Li Lancool 216 on overall quality. Open the case table to sort, filter, and compare side by side.

Compare these in the case table

Discussion

Comments on Lian Li Lancool 216

No comments yet.

Vendor copy

Amazon listing details

Marketplace feature text kept for reference. Structured specifications above are the source for scores and comparisons.

LANCOOL 216 PC case - Aesthetic looks, airflow focus, easy installation, and ample room for large GPU and cable managements. Good build quality computer case made of heavy-duty steel metal frame and 4.0mm tempered glass. Mid-tower Dimensions: (D) 480.9mm x (W) 235mm x (H) 491.7mm

Computer Case Focus on Cooling. The modular motherboard I/O allow you to move the motherboard to a higher/lower position for air-cooled/water-cooled systems. To ensure adequate airflow, 2x160mm ARGB front fans & 1x140mm rear fan are pre-installed; Fine mesh panel at the front, top, and on the PSU shroud¡¯s side help with a great ventilation

Easy Build Gaming PC Case. This case have a lot of flexibilities convenient for components installations: Removeable top radiator bracket; Fan cables easy-passage grooves; Innovative rear PCIe fan bracket; Velcro straps and small clips for cable routing. A seal plate on the top radiator bracket ensures no pressure leak when installing smaller than a 360 radiator/3x120mm fans at the top

Latest Gen. Large Graphics Card Ready. This Mid-tower Case is compatible with the largest NVIDIA 4000 series cards thanks to its ample room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode). A total of 2 x 3.5" HDD + 6 x 2.5" SSD drives can be installed with dedicated mounts for storage

Spacious PC case with Easy Cable Management. This desktop computer case offers cable grommet bar, velcro straps and small clips to keep the cables nice and neat. It supports E-ATX(width: under 280mm)/ATX/Micro-ATX/Mini-ITX motherboards, and the 2nd chamber cable management remains unaffected thanks to its symmetrical design

Privacy controls

Choose whether optional analytics may run. Necessary storage remains active because it supports security, login, requested preferences, and this choice.

Necessary Security, sessions, forms, and preferences you request.
Always active