Skip to content

Cooler Master · Mini-Tower · Mesh

Cooler Master NR200P V3

Mini-ITX · Black · USB-C

Quality
57
Quality / price
31
Max GPU
361 mm
Amazon
$164
Cooler Master NR200P V3
View Cooler Master NR200P V3 Gallery in high resolution
$164
Available on Amazon Updated Aug 30, 2026 Prime FBA
Overall quality57.0
Quality / price31.3
Cooling support8
$164 on Amazon Case table Compare this case

Check this case with a complete fit chainSelect a CPU and motherboard first; the Builder will then verify board size and GPU clearance. Start the compatibility check

Written analysis

Cooler Master NR200P V3 at a glance

The Cooler Master NR200P V3 is a Mini-Tower chassis with a mesh side panel profile. Supported boards: Mini-ITX. Primary materials are listed as Aluminum, SGCC Steel, Mesh, ABS Plastic.

Overall quality is 57.0, summing compatibility, cooling, storage, build quality, and connectivity. Max GPU length is 361 mm. Max CPU cooler height is 70 mm. Largest radiator support is listed at 280 mm.

Best fit: Performance desktops with long graphics cards and mainstream air or AIO cooling.

Cooling and front I/O

Front ports: 2 x USB 3.2 Gen 1, 1 x USB 3.2 Gen2 x 2 Type-C. USB-C is present on the front I/O. Dust filters: Yes.

Current value

At $164, quality / price is 31.3. Compare nearby cases of the same form factor below; clearance and panel type can outweigh a small quality gap.

Chassis data

Full specifications

Construction, clearances, cooling, storage, front I/O, and quality metrics in one technical sheet.

General

Manufacturer
Cooler Master
Case
Cooler Master NR200P V3
Form factor
Mini-Tower
Side panel
Mesh
Launch price
—
Amazon price
$164
Amazon availability
Available
Price updated
Aug 30, 2026

Construction

Material
Aluminum, SGCC Steel, Mesh, ABS Plastic
Color
Black
Side panel detail
mesh
Dimensions
378.2 x 185 x 292 mm
Weight
4.80 kg
PSU shroud
Yes
RGB lighting
No

Quality & value

Overall quality
57.0
Compatibility
10
Cooling support
8
Storage score
10
Build quality
15
Connectivity
14
Quality / price
31.3

Compatibility / clearances

Motherboard sizes
Mini-ITX
Max GPU length
361 mm
Max cooler height
70 mm
Max PSU length
130 mm
PSU form factor
SFX
PSU included
No

Cooling

Max radiator
280 mm
Fan support
Fan Support - FrontN/AFan Support - Top2 x 120 mm / 2 x 140 mmFan Support - BackN/AFan Support - Bottom1 x 120mm (W/O 3.5”HDD at the bottom)Fan Support - Left sideN/A
Radiator support
Fan Support - Left sideN/ARadiator Support - FrontN/ARadiator Support - Top120 / 140 / 240 / 280mmRadiator Support - BackN/ARadiator Support - BottomN/ARadiator Support - Left sideN/A
Pre-installed fans
Not specified
Dust filters
Yes

Storage & I/O

Drive bays
Drive Bays - 5.25” ODDN/ADrive Bays - 3.5” HDD1 (Max. 2)Drive Bays - 2.5” SSD1 (Max. 2)
Expansion slots
3
Front ports
2 x USB 3.2 Gen 1, 1 x USB 3.2 Gen2 x 2 Type-C
USB-C
Listed

Additional information

Also listed as
NR200P V3
Additional info
Included AccessoriesPCIe 5.0 x16 riser cable x1Included AccessoriesGPU holderVolume (incl. Protrusions)18.62 LDimensions (L x W x H)378.2 x 185 x 292 mm(Incl. Protrusions), 367.2 x 185 x 274 mm(Excl. Protrusions) Clearance - Graphics CardL: 361.5 mm (incl. power connector) H: 160 mm (incl. power connector) W: 78.5 mm (3.8 slots)

Amazon

Price history

Nearby quality

Similar cases

Cases close to Cooler Master NR200P V3 on overall quality. Open the case table to sort, filter, and compare side by side.

Compare these in the case table

Discussion

Comments on Cooler Master NR200P V3

No comments yet.

Vendor copy

Amazon listing details

Marketplace feature text kept for reference. Structured specifications above are the source for scores and comparisons.

Compact ITX Design: Unleash top-tier performance with a sleek 18.6L footprint, exclusively accommodating Mini-ITX motherboards.

Vertical GPU Mounting: Designed for vertical GPU setups, supporting high-end GPUs up to 361.5mm—including RTX 5090 |RX 9070 XT. Bundled with a PCIe 5.0 riser cable.

Stay Cool Under Pressure: Ready for top-mounted 240/280mm radiators for maximizing thermal efficiency. 400mm tubing recommended for clean front routing.

Compact SFX PSU Support: The small form factor design accommodates only SFX PSU with a length of up to 130mm.

Tool-Free Aluminum & Mesh Panels: Easily remove side panels for quick access and hassle-free upgrades or maintenance.

Vented Mesh Side Panel: Enhances airflow and features a removable design to highlight your vertically mounted GPU.

Privacy controls

Choose whether optional analytics may run. Necessary storage remains active because it supports security, login, requested preferences, and this choice.

Necessary Security, sessions, forms, and preferences you request.
Always active