Skip to content

G.SKILL · DDR5 · 64 GB

G.SKILL Ripjaws S5 Series (Intel XMP 3.0 & AMD Expo) DDR5 RAM 64GB (2x32GB) 6000MT/s CL36

(2x32GB) · 6000 MT/s · CL36 · 12.00 ns · Intel XMP + AMD EXPO

Performance
84
Perf / price
28
Capacity value
67
Amazon
$950
G.SKILL Ripjaws S5 Series (Intel XMP 3.0 & AMD Expo) DDR5 RAM 64GB (2x32GB) 6000MT/s CL36
View G.SKILL Ripjaws S5 Series (Intel XMP 3.0) DDR5 RAM Gallery in high resolution
$950
Unavailable Updated 1 month ago Prime FBA
Performance84.0
Performance / price28.3
Capacity value66.8
$950 on Amazon RAM table Compare this RAM

Build with this RAM kitSelect a CPU and motherboard first so the Builder can verify the memory type. Start with a compatible CPU

Written analysis

G.SKILL Ripjaws S5 Series (Intel XMP 3.0 & AMD Expo) DDR5 RAM 64GB (2x32GB) 6000MT/s CL36 at a glance

The G.SKILL Ripjaws S5 Series (Intel XMP 3.0 & AMD Expo) DDR5 RAM 64GB (2x32GB) 6000MT/s CL36 from G.SKILL is listed as part number F5-6000J3636F32GX2-RS5K and is a 64 GB DDR5 kit in a (2x32GB) layout on a DIMM form factor. It is non-ECC consumer memory, aimed at desktops, gaming, and general use.

Best fit: High-capacity creation, development, and multitasking builds where memory headroom matters more than minimum kit cost.

Performance

This kit runs at 6000 MT/s with primary timings of 36-36-36-96 and a calculated first-word latency of 12.00 ns. Its calculated performance score is 84.0, placing it in the entry performance tier . Actual operation at the advertised settings depends on CPU memory-controller, motherboard, and profile support.

Cost-effectiveness

From a cost-efficiency view this kit is expensive per gigabyte at $14.8/GB. Combined capacity value is 66.8. That is a balanced mid-range trade-off between speed, size, and price.

Memory data

Full specifications

Kit composition, capacity, operating speed, timings, voltage, compatibility details, and pricing in one technical sheet.

General

Manufacturer
G.SKILL
RAM
G.SKILL Ripjaws S5 Series (Intel XMP 3.0 & AMD Expo) DDR5 RAM 64GB (2x32GB) 6000MT/s CL36
Part number
F5-6000J3636F32GX2-RS5K
Launch price
—
Amazon price
$950
Availability
Unavailable
Price updated
1 month ago

Kit

Capacity / type
64 GB / DDR5
Kit / form factor
(2x32GB) / DIMM
Modules
2 × 32 GB
ECC
No
RGB
No
Memory profile
Intel XMP + AMD EXPO

Speed & timings

Data rate
6000 MT/s
CAS latency
CL36
First-word latency
12.00 ns
Primary timings
36-36-36-96
Voltage
1.35 V

Value

Amazon price
$950
Price / GB
$14.84
Performance / price
28.3
Capacity value
66.8

Additional information

Also listed as
64GB (2x32GB) 6000MT/s
Color
Matte Black

Amazon

Price history

Nearby performance

Similar RAM kits

DDR5 kits close to G.SKILL Ripjaws S5 Series (Intel XMP 3.0 & AMD Expo) DDR5 RAM 64GB (2x32GB) 6000MT/s CL36 on calculated performance. Open the RAM table to sort, filter, and compare side by side.

Compare these in the RAM table

Discussion

Comments on G.SKILL Ripjaws S5 Series (Intel XMP 3.0 & AMD Expo) DDR5 RAM 64GB (2x32GB) 6000MT/s CL36

No comments yet.

Vendor copy

Amazon listing details

Marketplace feature text kept for reference. Structured specs above are the source for scores and tables.

G.SKILL Ripjaws S5 Series DDR5 U-DIMM Memory Kit, Model: F5-6000J3636F32GX2-RS5K

64GB total capacity kit containing 2x32GB modules, rated for up to DDR5-6000 CL36-36-36-96 at 1.35V

Non-ECC, DDR5 U-DIMM, 288-pin, for Desktop PC & Gaming

Includes JEDEC default profile, and Intel XMP 3.0 & AMD EXPO memory overclock profile

Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.

For Intel Z890, Intel Z790, Intel Z690, Intel B860, Intel B760, Intel B660, AMD X870, AMD X670, AMD B850, AMD B840, AMD B650 platforms. Refer to G.SKILL memory QVL or RAM Configurator tool on the G.SKILL website for more details on validated motherboard and hardware.

Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components.

Memory kits will boot at JEDEC default SPD speed at default BIOS settings with compatible hardware.

For memory kits with XMP and/or EXPO overclock profile, enable XMP/EXPO/DOCP/A-XMP profile in BIOS to reach up to the rated potential XMP or EXPO overclock speed of the memory kit, subject to the use of compatible hardware. Enabling XMP or EXPO is an act of overclocking and requires BIOS setting adjustments.

Reaching the rated XMP or EXPO overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.

Privacy controls

Choose whether optional analytics may run. Necessary storage remains active because it supports security, login, requested preferences, and this choice.

Necessary Security, sessions, forms, and preferences you request.
Always active